WEAPON MODELLING: SHOTGUN DEVELOPMENT AND COMPLETE

      Somehow I've managed to overcome a thousand different crippling issues with my Shotgun Model. Even after begin told to start a new model half way through the assignment, I managed to get this done - it's a miracle!

   To be honest, I love the design and final result, but there are clearly a few flaws in it. What I will say though, is that these flaws could of been fixed if I had the time. I had issues with the Diffuse Map (not showing true colors), the Specular Map (not reflecting light correctly) and baking (low poly / high poly translation issues). Even so, I think the final shotgun turned out as well as it could of done given the time I had and the issues I overcome and still need to overcome.

   For my final hand-in of the year, I shall (along with all the previous sheets) these three presentation sheets showing the development of the shotgun model and it's final result.

COMMENTS AND CRITICISMS APPRECIATED!

WEAPON MODELLING: FINAL MODEL
by Christian Whelan

WEAPON MODELLING: SHOTGUN DEVELOPMENT
by Christian Whelan

WEAPON MODELLING: SHOTGUN BAKED TURN-AROUND
by Christian Whelan

WEAPON MODELLING: FINAL MODEL AND MAPS TURN-AROUND
by Christian Whelan

  
     From my last post on the shotgun model and it's Specular Map, I think the final model has decreased in quality. I think this is largely due to my issues with the Specular Maps and Diffuse Map. I wish I could of fixed it but hopefully this will do (for now).

  Actually, just this second, I've realized I've been an idiot. My diffuse texture is higher than the 1024x1024 limit out tutor has set. I guess that and the final presentation sheet will have to be changed! Brilliant...

NOTE: THE FINAL PRESENTATION SHEET ON THIS POST IS THE FINAL ONE NOW

NEXT POST: WEAPON MODELLING: MARMOSET RENDERING

WEAPON MODELLING: ASSAULT RIFLE DEVELOPMENT AND BAKED

     Coming up to the deadline for the last assignment of the year now - research, design, develop  texture and present a first person shooter gun in 3Ds Max.

   I started this assignment a month and a half ago with a weapon I researched, designed and modeled thoroughly. Unfortunately, this weapon was not up to the standard it should of been, or at least the issues found in the weapon would render any further progress below standard - I had to start again. My tutor did say however, that I could finish this weapon whilst starting a new one. Due to other course commitments, I haven't managed to finish the Assault Rifle, however, this is not to say I won't over summer.

   It seemed a waste to just drop the weapon to the side and continue on with a new weapon, so I decided to include the Assault Rifle (unfinished) in the final hand-in. This Assault Rifle, which I developed until baking the Normal Map, is below in two presentation sheets.

WEAPON MODELLING - ASSAULT RIFLE DEVELOPMENT
by Christian Whelan

WEAPON MODELLING - ASSAULT RIFLE TURN-AROUND
by Christian Whelan

      The presentation sheets really say all I need to say, so overall, I was and am really happy with how it turned out. Yes, it has topology issues, yes it has smoothing issues and yes, the symmetry screwed up the barrels and the side specific features. But regardless of this, I think considering it was my first attempt at modelling anything even remotely complex, it turned out great. It' s a complex weapon, and I think considering the ambition I put into this design, I pulled it off pretty nicely.

Can't wait to texture this!

NEXT POST: WEAPON MODELLING: SHOTGUN DEVELOPMENT AND COMPLETE

WEAPON MODELLING: SPECULAR MAP (COMPLETE)

       Didn't take me as long as I thought it would, but I finished my Specular Map and I think it's looking pretty good. I could of just put one single texture over all of the UV Islands, and I did initially (in a rush), but it just looked crap. The texture was larger in some areas, but smaller in others, and it just made it look cheap - plus, it's lazy. 

So I decided to take it home and battle against my terrible computer to refine it, adding in highlights where I thought necessary etc but the one thing I'm really pleased with, is the etched writing and logo in the weapon, I think that takes the ordinary shotgun and makes it a little more interesting. Have a look!

WEAPON MODELLING - SHOTGUN MODEL (IN PROGRESS)
by Christian Whelan

WEAPON MODELLING - SPECULAR DETAILS
by Christian Whelan

WEAPON MODELLING _ SPECULAR MAP
by Christian Whelan

     I used a different texture for the pump, and a different texture of the stock, because like I said, one texture just didn't make sense, this is a weapon of multiple parts after all.

        So, now all that left to do is actually paint it. To be honest, I don't think that is going to take very long, because as it stands, the test Diffuse Map I have on the weapon at the moment is pretty close to what I want, so all I'm going to do, is transfer the scratches of the Specular over to the Diffuse, lower the opacity, and then finally  add some texturing to the red paint (scratches etc). Once that's done, the weapon is done, even if there won't be much difference between the Specular and Diffuse - I'm not going to paint it green for the sake of it.

NEXT POST: WEAPON MODELLING: ASSAULT RIFLE DEVELOPMENT AND BAKED

WEAPON MODELLING: SPECULAR AND DIFFUSE MAP (IN PROGRESS)

        Ok, for some annoying reason, the blog posts I'd done today (3 of them) haven't posted or saved, so I have to start again... brilliant.

    After an attempt at baking the Normal, Complete, Specular and Diffuse map. I started again and refined the Normal and Complete Map bake. From there, I've now began to add the details into the Specular Map. I really want this to look good, so attention to detail is my goal for the rest of the day. Once that's done, the Texture will be more effective - it's a knock on effect.

    Anyway, I've done the majority of the weapon, adding in the highlights using white brushes, Photoshop Effects and Ndo as I go along to refine the lighting information in-engine (Xoliul Shader 2). Have a look!

WEAPON MODELLING - SPECULAR MAP IN PROGRESS
by Christian Whelan

WEAPON MODELLING - SPECULAR MAP IN PROGRESS
by Christian Whelan

WEAPON MODELLING - SPECULAR MAP IN PROGRESS
by Christian Whelan

NOTE: The last two screenshots are less developed than the first

 screenshot - I added in bolder scratches along the edges of the weapon.

WEAPON MODELLING - SPECULAR MAP - IN PROGRESS
by Christian Whelan

 As it stands, I'm more than pleased with the results, the problem is now, I have to complete the rest of the weapon on my home computer.... the one that struggles to run solitaire. So it's going to be a battle between man and machine for the weekend.

In addition, as I apply the maps one by one, it looks like the Specular Map is dulling the Normal map ever so slightly. It's fine, but when the lighting isn't hitting the Specular Map properly, it looks bland. Maybe I'll overlay the Normal Map onto the Specular to regain that information, then desaturate and invert it, that might do the trick!

NEXT POST: WEAPON MODELLING: SPECULAR MAP BAKED

WEAPON MODELLING: COMPLETE MAP AND NORMAL MAP (BAKED)

    After my initial attempt at baking the maps onto the shotgun, I started against in an attempt to do it 'properly'. So far, I've only baked the Normal Map and the Complete Map, but already, it's looking much, much, much better. Thank god! Have a look below.

WEAPON MODELLING - NORMAL AND COMPLETE MAP
By Christian WHelan

Now I just need to sort out the Specular to I can get painting the shotgun.

NEXT POST: WEAPON MODELLING: SPECULAR AND DIFFUSE MAP (IN PROGRESS)

WEAPON MODELLING: SPECULAR TEST (ISSUES)

     Somehow, I've made some progress with the Specular Map. The hardest part is getting my head around which map goes where. I've just this second, had a brainwave when looking at google for some desperate inspiration. Before this brainwave, I had a midly succesfull attempt at using the Specular, Diffuse and Normal Map together. This is below;

 

Note: This attempt does not include the Complete Map.

 

WEAPON MODELLING: SPECULAR TEST
by Christian Whelan

 

To get my head around the different maps and their use in 3Ds Max, I used this google image showing each of the different maps - it's really helpful. Thank god I found it!

 

DIFFERENT MAPS EXAMPLE
LINK 

 

So now all I need to do, is get each map into Photoshop and saved seperatley, then paint the texture and add the Complete Map to the Diffuse. Hopefully, by the end of today, I should have everything done besides the Diffuse Map (I'll paint that another day).

 

NEXT POST: WEAPON MODELLING: COMPLETE MAP AND NORMAL MAP (BAKED)

 

WEAPON MODELLING: ASSAULT RIFLE BAKED (NORMAL MAP)

     I've not touched this weapon in a few weeks now, and now I've gone back to it, I'm absolutley gutted that I couldn't finish it. Not that I don't like my shotgun, it's just that I think this looks better overall, even with the inconsitencies and dodgy baking - it's just a better weapon. I spent hours on this best and it's cool as hell!

Anyway, before I was told to start again (which was fair), I baked the high poly Normal Map onto the low poly and came out with a pretty snazzy looking weapon.

WEAPON MODELLING - REFERENCE CONCEPT
by Christian WHelan

WEAPO MODELLING - ASSAULT RIFLE BAKED
by Christian Whelan

WEAPON MODELLING - ASSAULT RIFLE BAKE TURN AROUND
by Christian Whelan

WEAPON MODELLING - ASSAULT RIFLE NORMAL MAP
by Christian Whelan

 

     There are serious issues with this weapon on all sides to be honest. The gun's barrels are way to thin, mainly because my use of symmetry was terrible, and the trigger, the grip and stock havn't smoothed properly, leaving a choppy looking weapon. Regardless though, I still think it's a good attempt considering it's was my first attempt at modelling anything remotely complex (the Old West Cart was terrible looking back at it).

NEXT POST: WEAPON MODELLING: SPECULAR TEST (ISSUES)

WEAPON MODELLING: SHOTGUN BAKED (NORMAL AND COMPLETE MAP)

      I overcame way to many issues to talk about here, to get this weapon baked. I spent at least 3 hours figuring out why the hell the shotgun wouldnt bake the normal texture. As it turns out, Nitrous was enabled... again! Sick of that thing. Anyway, the weapon is finally baked and ready to be painted and textured.

 

I used the Xoliul Shader to get this done for three reason - it's intuitive, it more effective and finally, I need a 'free' engine to shade the weapon for when I present the final model. Xoliul lets me do that (forget paying for Marmoset! I havent enough money as it is!).

 

WEAPON MODELLING - SHOTGUN BAKED
by Christian Whelan

WAEPOON MODELLING - NORMAL MAP
by Christian Whelan

WEAPON MODELLING - COMPLETE MAP
by Christian Whelan

    

      As I type, I'm attempting to develop a specular map - maybe I have to paint it first? I don't know, but if that's the case, I'll have to wait to get home where I stupidly left my digital pad. So far though, even though there are a couple of unfixable missing rays, the shotgun it turning out "Really smart" as my tutor puts it! So far so good!

 

NEXT POST: WEAPON MODELLING: ASSAULT RIFLE BAKED (NORMAL MAP)

WEAPON MODELLING: MAPPED MODEL / UV MAP

     My computer seems to be dying a slow death, but as it hangs onto it's life, I managed to get the low polygon shotgun model mapped, and exported the UV. I 'thought' I ran into a massive issue, but thankfully, it was just my stupidity - I still had the subdivision tools selected and the Nitrous driver was causing some graphical problems...

Anyhow, with a little help from the lifesaver that is Textools, I've produced a pretty good UV Map - it's organised, as efficient as it can be, and hopefully, once its baked, it will be as effective as I hope it will be. Although, I think that in some areas, the difference in topology between the Low Poly and High Poly models will become detrimental to the quality of the overall bake. I hope not, otherwise I'd have to UV Map the entire thing again...

WEAPON MODELLING - SHOTGUN UV MAPPED
by Christian Whelan

WEAPON MODELLING - UV MAP
by Christian Whelan

 

This UV Map will come in handy when it comes to painting the shotgun's texture.

NEXT POST: WEAPON MODELLING - SHOTGUN BAKED (NORMAL AND COMPLETE MAP)